Cup + Lid Ranch Dressing Carrot Celery and Chicken Leg Fake 3D Dip Lid Topper Sublimation 30oz / 20oz Skinny Insulated Tumbler; HOT Gift
from $24.99
Only 1 available
Only 1 available
Only 1 available
20 ounce or 30oz Skinny Tumbler, Stainless Steel, double walled, keeps liquid hot/cold for hours. These are SUBLIMATED, not epoxied.
They are custom made and can take up to two - three weeks to finish.
Due to the handmade nature of these tumblers, there may be slight imperfections, every tumbler and lid will be unique. Please contact me with any questions prior to purchase as there are no refunds or cancellations.
The Plain lid has a slide close gasket sealed lid with hole for straw.
Decorations are secured directly on the lid, so decorative lid does NOT slide close.
Finished Tumblers come with a STAW
This cup is Sublimated (not epoxied). It is an image that is heat dyed onto the cup, there is no epoxy. The image will not come off when washed (however like all double wall stainless steel cups, do NOT put in dishwasher or microwave). The 3D lid is sealed with UV resin, it will not come off when lightly washed, do NOT submerge in liquid, do not wash in dishwasher, or do not put in microwave.
They are not overly fragile, however if you drop it, it could break, just like any resin item.
Monitor colors may reflect slightly different colors than in real life. Please ask any questions prior to buying.
These are custom/personalized/made to order products and no refund will be made.
3D lid cleaning directions: Gently hand wash and dry very well so there is no water retention. Do NOT put in dishwasher or microwave, do not drop. When removing from cup, gently pull up (not by plastic medicine bottle). It will come off, it has a good seal because of the gasket.
Please visit my other listings and thank you for checking this one out.
They are custom made and can take up to two - three weeks to finish.
Due to the handmade nature of these tumblers, there may be slight imperfections, every tumbler and lid will be unique. Please contact me with any questions prior to purchase as there are no refunds or cancellations.
The Plain lid has a slide close gasket sealed lid with hole for straw.
Decorations are secured directly on the lid, so decorative lid does NOT slide close.
Finished Tumblers come with a STAW
This cup is Sublimated (not epoxied). It is an image that is heat dyed onto the cup, there is no epoxy. The image will not come off when washed (however like all double wall stainless steel cups, do NOT put in dishwasher or microwave). The 3D lid is sealed with UV resin, it will not come off when lightly washed, do NOT submerge in liquid, do not wash in dishwasher, or do not put in microwave.
They are not overly fragile, however if you drop it, it could break, just like any resin item.
Monitor colors may reflect slightly different colors than in real life. Please ask any questions prior to buying.
These are custom/personalized/made to order products and no refund will be made.
3D lid cleaning directions: Gently hand wash and dry very well so there is no water retention. Do NOT put in dishwasher or microwave, do not drop. When removing from cup, gently pull up (not by plastic medicine bottle). It will come off, it has a good seal because of the gasket.
Please visit my other listings and thank you for checking this one out.
Capacity:
Style:
Quantity:
20 ounce or 30oz Skinny Tumbler, Stainless Steel, double walled, keeps liquid hot/cold for hours. These are SUBLIMATED, not epoxied.
They are custom made and can take up to two - three weeks to finish.
Due to the handmade nature of these tumblers, there may be slight imperfections, every tumbler and lid will be unique. Please contact me with any questions prior to purchase as there are no refunds or cancellations.
The Plain lid has a slide close gasket sealed lid with hole for straw.
Decorations are secured directly on the lid, so decorative lid does NOT slide close.
Finished Tumblers come with a STAW
This cup is Sublimated (not epoxied). It is an image that is heat dyed onto the cup, there is no epoxy. The image will not come off when washed (however like all double wall stainless steel cups, do NOT put in dishwasher or microwave). The 3D lid is sealed with UV resin, it will not come off when lightly washed, do NOT submerge in liquid, do not wash in dishwasher, or do not put in microwave.
They are not overly fragile, however if you drop it, it could break, just like any resin item.
Monitor colors may reflect slightly different colors than in real life. Please ask any questions prior to buying.
These are custom/personalized/made to order products and no refund will be made.
3D lid cleaning directions: Gently hand wash and dry very well so there is no water retention. Do NOT put in dishwasher or microwave, do not drop. When removing from cup, gently pull up (not by plastic medicine bottle). It will come off, it has a good seal because of the gasket.
Please visit my other listings and thank you for checking this one out.
They are custom made and can take up to two - three weeks to finish.
Due to the handmade nature of these tumblers, there may be slight imperfections, every tumbler and lid will be unique. Please contact me with any questions prior to purchase as there are no refunds or cancellations.
The Plain lid has a slide close gasket sealed lid with hole for straw.
Decorations are secured directly on the lid, so decorative lid does NOT slide close.
Finished Tumblers come with a STAW
This cup is Sublimated (not epoxied). It is an image that is heat dyed onto the cup, there is no epoxy. The image will not come off when washed (however like all double wall stainless steel cups, do NOT put in dishwasher or microwave). The 3D lid is sealed with UV resin, it will not come off when lightly washed, do NOT submerge in liquid, do not wash in dishwasher, or do not put in microwave.
They are not overly fragile, however if you drop it, it could break, just like any resin item.
Monitor colors may reflect slightly different colors than in real life. Please ask any questions prior to buying.
These are custom/personalized/made to order products and no refund will be made.
3D lid cleaning directions: Gently hand wash and dry very well so there is no water retention. Do NOT put in dishwasher or microwave, do not drop. When removing from cup, gently pull up (not by plastic medicine bottle). It will come off, it has a good seal because of the gasket.
Please visit my other listings and thank you for checking this one out.
20 ounce or 30oz Skinny Tumbler, Stainless Steel, double walled, keeps liquid hot/cold for hours. These are SUBLIMATED, not epoxied.
They are custom made and can take up to two - three weeks to finish.
Due to the handmade nature of these tumblers, there may be slight imperfections, every tumbler and lid will be unique. Please contact me with any questions prior to purchase as there are no refunds or cancellations.
The Plain lid has a slide close gasket sealed lid with hole for straw.
Decorations are secured directly on the lid, so decorative lid does NOT slide close.
Finished Tumblers come with a STAW
This cup is Sublimated (not epoxied). It is an image that is heat dyed onto the cup, there is no epoxy. The image will not come off when washed (however like all double wall stainless steel cups, do NOT put in dishwasher or microwave). The 3D lid is sealed with UV resin, it will not come off when lightly washed, do NOT submerge in liquid, do not wash in dishwasher, or do not put in microwave.
They are not overly fragile, however if you drop it, it could break, just like any resin item.
Monitor colors may reflect slightly different colors than in real life. Please ask any questions prior to buying.
These are custom/personalized/made to order products and no refund will be made.
3D lid cleaning directions: Gently hand wash and dry very well so there is no water retention. Do NOT put in dishwasher or microwave, do not drop. When removing from cup, gently pull up (not by plastic medicine bottle). It will come off, it has a good seal because of the gasket.
Please visit my other listings and thank you for checking this one out.
They are custom made and can take up to two - three weeks to finish.
Due to the handmade nature of these tumblers, there may be slight imperfections, every tumbler and lid will be unique. Please contact me with any questions prior to purchase as there are no refunds or cancellations.
The Plain lid has a slide close gasket sealed lid with hole for straw.
Decorations are secured directly on the lid, so decorative lid does NOT slide close.
Finished Tumblers come with a STAW
This cup is Sublimated (not epoxied). It is an image that is heat dyed onto the cup, there is no epoxy. The image will not come off when washed (however like all double wall stainless steel cups, do NOT put in dishwasher or microwave). The 3D lid is sealed with UV resin, it will not come off when lightly washed, do NOT submerge in liquid, do not wash in dishwasher, or do not put in microwave.
They are not overly fragile, however if you drop it, it could break, just like any resin item.
Monitor colors may reflect slightly different colors than in real life. Please ask any questions prior to buying.
These are custom/personalized/made to order products and no refund will be made.
3D lid cleaning directions: Gently hand wash and dry very well so there is no water retention. Do NOT put in dishwasher or microwave, do not drop. When removing from cup, gently pull up (not by plastic medicine bottle). It will come off, it has a good seal because of the gasket.
Please visit my other listings and thank you for checking this one out.