Cup + Lid FUKITOL Prescription Pill Fake 3D Ice Lid Sublimation 30oz & 20oz Skinny Insulated Tumbler, Keeps hot/cold for hours OR plain Lid
from $25.00
Only 8 available
Only 8 available
Only 8 available
Only 8 available
Only 8 available
Only 8 available
Only 8 available
Only 8 available
20 ounce or 30oz Skinny Tumbler, Stainless Steel, double walled, keeps liquid hot/cold for hours. These are SUBLIMATED, not epoxied.
They are custom made and can take up to two weeks to finish.
*** You can place an order for the tumbler without the 3D lid, you will receive the lid as pictured (slide close push on, gasket sealed lid) ***
Personalization is a name of your choice and will be placed in the green highlighted box after the word "PATIENT"
Slide close gasket sealed lid with hole for straw. This will come with two lids, the one decorated as seen in the pic and a second plain lid. Both are functional.
This cup is Sublimated (not epoxied). It is an image that is heat dyed onto the cup, there is no epoxy. The image will not come off when washed (however like all double wall stainless steel cups, do NOT put in dishwasher or microwave). The 3D lid is sealed with UV resin, it will not come off when lightly washed, do NOT submerge in liquid, wash in dishwasher, or put in microwave.
They are not overly fragile, however if you drop it, it could break, just like any resin item.
Monitor colors may reflect slightly different colors than in real life. Please ask any questions prior to buying.
These are custom/personalized/made to order products and no refund will be made. They are custom made and can take up to two weeks to finish.
3D lid cleaning directions: Gently hand wash and dry very well so there is no water retention. Do NOT put in dishwasher or microwave, do not drop. When removing from cup, gently pull up (not by plastic medicine bottle). It will come off, it has a good seal because of the gasket.
Please visit my other listings and thank you for checking this one out.
They are custom made and can take up to two weeks to finish.
*** You can place an order for the tumbler without the 3D lid, you will receive the lid as pictured (slide close push on, gasket sealed lid) ***
Personalization is a name of your choice and will be placed in the green highlighted box after the word "PATIENT"
Slide close gasket sealed lid with hole for straw. This will come with two lids, the one decorated as seen in the pic and a second plain lid. Both are functional.
This cup is Sublimated (not epoxied). It is an image that is heat dyed onto the cup, there is no epoxy. The image will not come off when washed (however like all double wall stainless steel cups, do NOT put in dishwasher or microwave). The 3D lid is sealed with UV resin, it will not come off when lightly washed, do NOT submerge in liquid, wash in dishwasher, or put in microwave.
They are not overly fragile, however if you drop it, it could break, just like any resin item.
Monitor colors may reflect slightly different colors than in real life. Please ask any questions prior to buying.
These are custom/personalized/made to order products and no refund will be made. They are custom made and can take up to two weeks to finish.
3D lid cleaning directions: Gently hand wash and dry very well so there is no water retention. Do NOT put in dishwasher or microwave, do not drop. When removing from cup, gently pull up (not by plastic medicine bottle). It will come off, it has a good seal because of the gasket.
Please visit my other listings and thank you for checking this one out.
Capacity:
Style:
Quantity:
20 ounce or 30oz Skinny Tumbler, Stainless Steel, double walled, keeps liquid hot/cold for hours. These are SUBLIMATED, not epoxied.
They are custom made and can take up to two weeks to finish.
*** You can place an order for the tumbler without the 3D lid, you will receive the lid as pictured (slide close push on, gasket sealed lid) ***
Personalization is a name of your choice and will be placed in the green highlighted box after the word "PATIENT"
Slide close gasket sealed lid with hole for straw. This will come with two lids, the one decorated as seen in the pic and a second plain lid. Both are functional.
This cup is Sublimated (not epoxied). It is an image that is heat dyed onto the cup, there is no epoxy. The image will not come off when washed (however like all double wall stainless steel cups, do NOT put in dishwasher or microwave). The 3D lid is sealed with UV resin, it will not come off when lightly washed, do NOT submerge in liquid, wash in dishwasher, or put in microwave.
They are not overly fragile, however if you drop it, it could break, just like any resin item.
Monitor colors may reflect slightly different colors than in real life. Please ask any questions prior to buying.
These are custom/personalized/made to order products and no refund will be made. They are custom made and can take up to two weeks to finish.
3D lid cleaning directions: Gently hand wash and dry very well so there is no water retention. Do NOT put in dishwasher or microwave, do not drop. When removing from cup, gently pull up (not by plastic medicine bottle). It will come off, it has a good seal because of the gasket.
Please visit my other listings and thank you for checking this one out.
They are custom made and can take up to two weeks to finish.
*** You can place an order for the tumbler without the 3D lid, you will receive the lid as pictured (slide close push on, gasket sealed lid) ***
Personalization is a name of your choice and will be placed in the green highlighted box after the word "PATIENT"
Slide close gasket sealed lid with hole for straw. This will come with two lids, the one decorated as seen in the pic and a second plain lid. Both are functional.
This cup is Sublimated (not epoxied). It is an image that is heat dyed onto the cup, there is no epoxy. The image will not come off when washed (however like all double wall stainless steel cups, do NOT put in dishwasher or microwave). The 3D lid is sealed with UV resin, it will not come off when lightly washed, do NOT submerge in liquid, wash in dishwasher, or put in microwave.
They are not overly fragile, however if you drop it, it could break, just like any resin item.
Monitor colors may reflect slightly different colors than in real life. Please ask any questions prior to buying.
These are custom/personalized/made to order products and no refund will be made. They are custom made and can take up to two weeks to finish.
3D lid cleaning directions: Gently hand wash and dry very well so there is no water retention. Do NOT put in dishwasher or microwave, do not drop. When removing from cup, gently pull up (not by plastic medicine bottle). It will come off, it has a good seal because of the gasket.
Please visit my other listings and thank you for checking this one out.
20 ounce or 30oz Skinny Tumbler, Stainless Steel, double walled, keeps liquid hot/cold for hours. These are SUBLIMATED, not epoxied.
They are custom made and can take up to two weeks to finish.
*** You can place an order for the tumbler without the 3D lid, you will receive the lid as pictured (slide close push on, gasket sealed lid) ***
Personalization is a name of your choice and will be placed in the green highlighted box after the word "PATIENT"
Slide close gasket sealed lid with hole for straw. This will come with two lids, the one decorated as seen in the pic and a second plain lid. Both are functional.
This cup is Sublimated (not epoxied). It is an image that is heat dyed onto the cup, there is no epoxy. The image will not come off when washed (however like all double wall stainless steel cups, do NOT put in dishwasher or microwave). The 3D lid is sealed with UV resin, it will not come off when lightly washed, do NOT submerge in liquid, wash in dishwasher, or put in microwave.
They are not overly fragile, however if you drop it, it could break, just like any resin item.
Monitor colors may reflect slightly different colors than in real life. Please ask any questions prior to buying.
These are custom/personalized/made to order products and no refund will be made. They are custom made and can take up to two weeks to finish.
3D lid cleaning directions: Gently hand wash and dry very well so there is no water retention. Do NOT put in dishwasher or microwave, do not drop. When removing from cup, gently pull up (not by plastic medicine bottle). It will come off, it has a good seal because of the gasket.
Please visit my other listings and thank you for checking this one out.
They are custom made and can take up to two weeks to finish.
*** You can place an order for the tumbler without the 3D lid, you will receive the lid as pictured (slide close push on, gasket sealed lid) ***
Personalization is a name of your choice and will be placed in the green highlighted box after the word "PATIENT"
Slide close gasket sealed lid with hole for straw. This will come with two lids, the one decorated as seen in the pic and a second plain lid. Both are functional.
This cup is Sublimated (not epoxied). It is an image that is heat dyed onto the cup, there is no epoxy. The image will not come off when washed (however like all double wall stainless steel cups, do NOT put in dishwasher or microwave). The 3D lid is sealed with UV resin, it will not come off when lightly washed, do NOT submerge in liquid, wash in dishwasher, or put in microwave.
They are not overly fragile, however if you drop it, it could break, just like any resin item.
Monitor colors may reflect slightly different colors than in real life. Please ask any questions prior to buying.
These are custom/personalized/made to order products and no refund will be made. They are custom made and can take up to two weeks to finish.
3D lid cleaning directions: Gently hand wash and dry very well so there is no water retention. Do NOT put in dishwasher or microwave, do not drop. When removing from cup, gently pull up (not by plastic medicine bottle). It will come off, it has a good seal because of the gasket.
Please visit my other listings and thank you for checking this one out.