Cup + Lid FUKITOL Blue Prescription Pill Fake 3D Ice Lid Topper & Sublimation 30oz or 20oz Skinny Insulated Tumbler; Funny HOT Gag Gift
from $29.99
20 ounce or 30oz Skinny Tumbler, Stainless Steel, double walled, keeps liquid hot/cold for hours. These are SUBLIMATED, not epoxied.
They are custom made and can take up to two - three weeks to finish. Pill colors and placement can vary
Personalization is a name of your choice and will be placed in the green highlighted box after the word "PATIENT" - Please put the name in the requested area on the order. If it is not there there will not be any personalization on the tumbler. I can not add a name after the order is made nor can I refund. Please ask questions.
To receive a personalized tumbler, you must put a name in the "personalization" field, otherwise there will be NO word "PATIENT" OR NAME. That name will be put on the tumbler only (not the label on the lid) after the word "PATIENT".
Due to the handmade nature of these tumblers, there may be slight imperfections, every tumbler and lid will be unique. Please contact me with any questions prior to purchase as there are no refunds or cancellations.
The Plain lid has a slide close gasket sealed lid with hole for straw.
Decorations are secured directly on the lid, so decorative lid does NOT slide close.
Finished Tumblers come with a STAW
This cup is Sublimated (not epoxied). It is an image that is heat dyed onto the cup, there is no epoxy. The image will not come off when washed (however like all double wall stainless steel cups, do NOT put in dishwasher or microwave). The 3D lid is sealed with UV resin, it will not come off when lightly washed, do NOT submerge in liquid, wash in dishwasher, or put in microwave.
They are not overly fragile, however if you drop it, it could break, just like any resin item.
Monitor colors may reflect slightly different colors than in real life. Please ask any questions prior to buying.
These are custom/personalized/made to order products and no refund will be made. They are custom made and can take up to two - three weeks to finish.
3D lid cleaning directions: Gently hand wash and dry very well so there is no water retention. Do NOT put in dishwasher or microwave, do not drop. When removing from cup, gently pull up (not by plastic medicine bottle). It will come off, it has a good seal because of the gasket.
Please visit my other listings and thank you for checking this one out.
They are custom made and can take up to two - three weeks to finish. Pill colors and placement can vary
Personalization is a name of your choice and will be placed in the green highlighted box after the word "PATIENT" - Please put the name in the requested area on the order. If it is not there there will not be any personalization on the tumbler. I can not add a name after the order is made nor can I refund. Please ask questions.
To receive a personalized tumbler, you must put a name in the "personalization" field, otherwise there will be NO word "PATIENT" OR NAME. That name will be put on the tumbler only (not the label on the lid) after the word "PATIENT".
Due to the handmade nature of these tumblers, there may be slight imperfections, every tumbler and lid will be unique. Please contact me with any questions prior to purchase as there are no refunds or cancellations.
The Plain lid has a slide close gasket sealed lid with hole for straw.
Decorations are secured directly on the lid, so decorative lid does NOT slide close.
Finished Tumblers come with a STAW
This cup is Sublimated (not epoxied). It is an image that is heat dyed onto the cup, there is no epoxy. The image will not come off when washed (however like all double wall stainless steel cups, do NOT put in dishwasher or microwave). The 3D lid is sealed with UV resin, it will not come off when lightly washed, do NOT submerge in liquid, wash in dishwasher, or put in microwave.
They are not overly fragile, however if you drop it, it could break, just like any resin item.
Monitor colors may reflect slightly different colors than in real life. Please ask any questions prior to buying.
These are custom/personalized/made to order products and no refund will be made. They are custom made and can take up to two - three weeks to finish.
3D lid cleaning directions: Gently hand wash and dry very well so there is no water retention. Do NOT put in dishwasher or microwave, do not drop. When removing from cup, gently pull up (not by plastic medicine bottle). It will come off, it has a good seal because of the gasket.
Please visit my other listings and thank you for checking this one out.
Capacity:
Do you want a Plain Lid or 3D Lid:
Quantity:
20 ounce or 30oz Skinny Tumbler, Stainless Steel, double walled, keeps liquid hot/cold for hours. These are SUBLIMATED, not epoxied.
They are custom made and can take up to two - three weeks to finish. Pill colors and placement can vary
Personalization is a name of your choice and will be placed in the green highlighted box after the word "PATIENT" - Please put the name in the requested area on the order. If it is not there there will not be any personalization on the tumbler. I can not add a name after the order is made nor can I refund. Please ask questions.
To receive a personalized tumbler, you must put a name in the "personalization" field, otherwise there will be NO word "PATIENT" OR NAME. That name will be put on the tumbler only (not the label on the lid) after the word "PATIENT".
Due to the handmade nature of these tumblers, there may be slight imperfections, every tumbler and lid will be unique. Please contact me with any questions prior to purchase as there are no refunds or cancellations.
The Plain lid has a slide close gasket sealed lid with hole for straw.
Decorations are secured directly on the lid, so decorative lid does NOT slide close.
Finished Tumblers come with a STAW
This cup is Sublimated (not epoxied). It is an image that is heat dyed onto the cup, there is no epoxy. The image will not come off when washed (however like all double wall stainless steel cups, do NOT put in dishwasher or microwave). The 3D lid is sealed with UV resin, it will not come off when lightly washed, do NOT submerge in liquid, wash in dishwasher, or put in microwave.
They are not overly fragile, however if you drop it, it could break, just like any resin item.
Monitor colors may reflect slightly different colors than in real life. Please ask any questions prior to buying.
These are custom/personalized/made to order products and no refund will be made. They are custom made and can take up to two - three weeks to finish.
3D lid cleaning directions: Gently hand wash and dry very well so there is no water retention. Do NOT put in dishwasher or microwave, do not drop. When removing from cup, gently pull up (not by plastic medicine bottle). It will come off, it has a good seal because of the gasket.
Please visit my other listings and thank you for checking this one out.
They are custom made and can take up to two - three weeks to finish. Pill colors and placement can vary
Personalization is a name of your choice and will be placed in the green highlighted box after the word "PATIENT" - Please put the name in the requested area on the order. If it is not there there will not be any personalization on the tumbler. I can not add a name after the order is made nor can I refund. Please ask questions.
To receive a personalized tumbler, you must put a name in the "personalization" field, otherwise there will be NO word "PATIENT" OR NAME. That name will be put on the tumbler only (not the label on the lid) after the word "PATIENT".
Due to the handmade nature of these tumblers, there may be slight imperfections, every tumbler and lid will be unique. Please contact me with any questions prior to purchase as there are no refunds or cancellations.
The Plain lid has a slide close gasket sealed lid with hole for straw.
Decorations are secured directly on the lid, so decorative lid does NOT slide close.
Finished Tumblers come with a STAW
This cup is Sublimated (not epoxied). It is an image that is heat dyed onto the cup, there is no epoxy. The image will not come off when washed (however like all double wall stainless steel cups, do NOT put in dishwasher or microwave). The 3D lid is sealed with UV resin, it will not come off when lightly washed, do NOT submerge in liquid, wash in dishwasher, or put in microwave.
They are not overly fragile, however if you drop it, it could break, just like any resin item.
Monitor colors may reflect slightly different colors than in real life. Please ask any questions prior to buying.
These are custom/personalized/made to order products and no refund will be made. They are custom made and can take up to two - three weeks to finish.
3D lid cleaning directions: Gently hand wash and dry very well so there is no water retention. Do NOT put in dishwasher or microwave, do not drop. When removing from cup, gently pull up (not by plastic medicine bottle). It will come off, it has a good seal because of the gasket.
Please visit my other listings and thank you for checking this one out.
20 ounce or 30oz Skinny Tumbler, Stainless Steel, double walled, keeps liquid hot/cold for hours. These are SUBLIMATED, not epoxied.
They are custom made and can take up to two - three weeks to finish. Pill colors and placement can vary
Personalization is a name of your choice and will be placed in the green highlighted box after the word "PATIENT" - Please put the name in the requested area on the order. If it is not there there will not be any personalization on the tumbler. I can not add a name after the order is made nor can I refund. Please ask questions.
To receive a personalized tumbler, you must put a name in the "personalization" field, otherwise there will be NO word "PATIENT" OR NAME. That name will be put on the tumbler only (not the label on the lid) after the word "PATIENT".
Due to the handmade nature of these tumblers, there may be slight imperfections, every tumbler and lid will be unique. Please contact me with any questions prior to purchase as there are no refunds or cancellations.
The Plain lid has a slide close gasket sealed lid with hole for straw.
Decorations are secured directly on the lid, so decorative lid does NOT slide close.
Finished Tumblers come with a STAW
This cup is Sublimated (not epoxied). It is an image that is heat dyed onto the cup, there is no epoxy. The image will not come off when washed (however like all double wall stainless steel cups, do NOT put in dishwasher or microwave). The 3D lid is sealed with UV resin, it will not come off when lightly washed, do NOT submerge in liquid, wash in dishwasher, or put in microwave.
They are not overly fragile, however if you drop it, it could break, just like any resin item.
Monitor colors may reflect slightly different colors than in real life. Please ask any questions prior to buying.
These are custom/personalized/made to order products and no refund will be made. They are custom made and can take up to two - three weeks to finish.
3D lid cleaning directions: Gently hand wash and dry very well so there is no water retention. Do NOT put in dishwasher or microwave, do not drop. When removing from cup, gently pull up (not by plastic medicine bottle). It will come off, it has a good seal because of the gasket.
Please visit my other listings and thank you for checking this one out.
They are custom made and can take up to two - three weeks to finish. Pill colors and placement can vary
Personalization is a name of your choice and will be placed in the green highlighted box after the word "PATIENT" - Please put the name in the requested area on the order. If it is not there there will not be any personalization on the tumbler. I can not add a name after the order is made nor can I refund. Please ask questions.
To receive a personalized tumbler, you must put a name in the "personalization" field, otherwise there will be NO word "PATIENT" OR NAME. That name will be put on the tumbler only (not the label on the lid) after the word "PATIENT".
Due to the handmade nature of these tumblers, there may be slight imperfections, every tumbler and lid will be unique. Please contact me with any questions prior to purchase as there are no refunds or cancellations.
The Plain lid has a slide close gasket sealed lid with hole for straw.
Decorations are secured directly on the lid, so decorative lid does NOT slide close.
Finished Tumblers come with a STAW
This cup is Sublimated (not epoxied). It is an image that is heat dyed onto the cup, there is no epoxy. The image will not come off when washed (however like all double wall stainless steel cups, do NOT put in dishwasher or microwave). The 3D lid is sealed with UV resin, it will not come off when lightly washed, do NOT submerge in liquid, wash in dishwasher, or put in microwave.
They are not overly fragile, however if you drop it, it could break, just like any resin item.
Monitor colors may reflect slightly different colors than in real life. Please ask any questions prior to buying.
These are custom/personalized/made to order products and no refund will be made. They are custom made and can take up to two - three weeks to finish.
3D lid cleaning directions: Gently hand wash and dry very well so there is no water retention. Do NOT put in dishwasher or microwave, do not drop. When removing from cup, gently pull up (not by plastic medicine bottle). It will come off, it has a good seal because of the gasket.
Please visit my other listings and thank you for checking this one out.